Monitoring & Specialty Systems Archives - Euclid Positioning Systems

GYRO X II Automated Gyro Station

admin — Thu, 15 Dec 2022 12:22:58 +0000

Acquire true north anytime and anywhere

GYRO X II uses a suspended gyromotor that oscillates around the earth’s meridian (true north) due to the principle of precession caused by the rotation of the earth. This principle realizes faster and more precise measurement than other solutions.

Comparison with Other Solutions

Only 19 minutes* for measurement

While the conventional type of instruments requires more than 40 minutes for measurement, GYRO X II requires only 19 minutes for a measurement, effectively doubling your work efficiency,* and decreasing operators’ stress anytime and anywhere, on every job.

Combination of preliminary measurement and regular measurement. In the regular measurement, users have a choice of follow-up or time measurement. When measured at 35° latitude area. Measurement time differs by the latitude due to the nature of gyro motor.

SX Series Total Station for GYRO X II*2

15” Azimuth Accuracy

The combination of special application software and advanced motor drive system allows the true north direction to be automatically calculated in accuracy of ±15″ (5mgon/0.074 mil). GYRO X II increased accuracy by 25 percent compared to the conventional manual type.

Easy operation even for unskilled operators

Only three steps are required for the measurement.

Point the Gyro Station roughly to the direction of true north
Release the clamp
Push measurement button

Eliminates the chance of human error

Freedom from human error is another advantage of GYRO X II. It eliminates floating index reading error and timing measurement error. With GYRO X II, even unpracticed operators can produce consistent and accurate results.

Auto-pointing total stations

Gyro X II incorporates a gyroscope unit on auto-pointing total stations. These total stations are equipped with the gyro calculation programs as well as functions for ordinary surveying works to enhance efficiency and productivity on all survey projects after the measurement of true north.

The post GYRO X II Automated Gyro Station appeared first on Euclid Positioning Systems.

NET AXII Series (NET05 AXII)

admin — Thu, 15 Dec 2022 12:07:59 +0000

Ultra-high-precision Distance Measurement

These fully robotic monitoring stations offer a superior level of performance compared to conventional systems that simply lock on to the nearest targets. The NET AXII series
excels at precision-intensive tasks such as monitoring, bridge construction, and other highly detailed engineering projects.

Precise angle accuracies 0.5” (NET05 AXII) / 1” (NET1 AXII)
1” Auto-pointing accuracy
Remote control through on-line PC
Exclusive reflector prescan technology
Enforced durability for long-term deformation / monitoring applications

For Monitoring

The NET AXII series provides superior measuring precision for high-precision monitoring applications and can be utilized to configure a high-precision monitoring system.

For Industrial Measurement

Achieve sub-millimeter accuracy using the NET05 AXII and reflective sheet targets. It’s excellent for measuring the shape and alignment of large-scale structures, such as various plants and bridges, as well as for precise measurement of ships, railroad cars and airplanes.

For First Order Survey

You get high-precision angle accuracy (NET05 AXII: 0.5”, NET1 AXII: 1”), which can be applied for a wide range of precise measurements. The high-precision 3D station is equipped with an automatic tracking system and can be configured by remote control.

Ultra-high-precision Distance Measurement

NET05 AXII

Using reflective sheet targets, the NET05 AXII provides sub-millimeter accuracy (0.5 mm + 1 ppm) in a range of up to 200 m.

NET1 AXII

The reflectorless measurement range of the NET1 AXII model is doubled to 400 m (1,310 ft.) when using a Kodak white side (90% reflective).

Advanced Accuracy

Our IACS (Independent Angle Calibration System) technology provides “best-in-class” angle accuracy. With a biaxial level compensation mechanism that has a wide
adjusting range of ±6 feet, which is twice as wide as the previous models. This enables highly accurate measuring performance.

The auto-pointing accuracy* with the standard prism is 1” (1 mm at 200 m), and 4” (1 mm at 50 m) with a reflective sheet.

*Auto-pointing accuracy is verified using the methods specified by ISO 17123-3.

Advanced Auto-pointing Algorithm for Multiple Prisms

The NET series incorporates an advanced auto-pointing algorithm* optimized for monitoring applications. Your instrument automatically sights the prism closest to the telescope center regardless of the distance. This works even if multiple prisms or other reflective objects are in the field-of-view.
The feature dramatically enhances the reliability in periodic monitoring of predetermined prism locations.

With a regular auto-pointing algorithm, the instrument normally sights the nearest target with the strongest reflection.

The post NET AXII Series (NET05 AXII) appeared first on Euclid Positioning Systems.

NET AXII Series (NET1 AXII)

admin — Thu, 15 Dec 2022 08:26:26 +0000

Ultra-high-precision Distance Measurement

Precise angle accuracies 0.5” (NET05 AXII) / 1” (NET1 AXII)
1” Auto-pointing accuracy
Remote control through on-line PC
Exclusive reflector prescan technology
Enforced durability for long-term deformation / monitoring applications

For Monitoring

The NET AXII series provides superior measuring precision for high-precision monitoring applications and can be utilized to configure a high-precision monitoring system.

For Industrial Measurement

For First Order Survey

Ultra-high-precision Distance Measurement

NET05 AXII

Using reflective sheet targets, the NET05 AXII provides sub-millimeter accuracy (0.5 mm + 1 ppm) in a range of up to 200 m.

NET1 AXII

The reflectorless measurement range of the NET1 AXII model is doubled to 400 m (1,310 ft.) when using a Kodak white side (90% reflective).

Advanced Accuracy

The auto-pointing accuracy* with the standard prism is 1” (1 mm at 200 m), and 4” (1 mm at 50 m) with a reflective sheet.

*Auto-pointing accuracy is verified using the methods specified by ISO 17123-3.

Advanced Auto-pointing Algorithm for Multiple Prisms

With a regular auto-pointing algorithm, the instrument normally sights the nearest target with the strongest reflection.

The post NET AXII Series (NET1 AXII) appeared first on Euclid Positioning Systems.